Nerjaveèi asye tiyo 321 Bobin Tib Manifakti
Espesifikasyon:
Nerjaveèi asye tiyo 321 Bobin Tib Manifakti
1).Dyamèt: 3.175-50.8mm (1/8″-2inc)
2).WT: 0.3 - 3mm
3).Klas: 304 316304 304L 316 316L 310S 2205 2507 625 825 elatriye.
4).Estanda: GB/ISO/EN/ASTM/JIS, elatriye.
7. Tolerans: OD: +/-0.01mm;Epesè: +/-0.01%.
8.Surface: Bright oswa anneald ak mou
9. Materyèl: 304, 304L, 316L, 321, 301, 201, 202, 409, 430, 410, alyaj 625 825 2205 2507 elatriye.
10. Anbalaj: LCL an bwa ka Poly Bay, FCL asye pwòp tèt ou oswa Poly Bay
11. Tès: Sede fòs, fòs rupture, mezi hydrapress
12.Guarantee: twazyèm pati a (pa egzanp: SGS TV) cetification ect.
13. Aplikasyon: Dekorasyon, mèb, fè balistrad, fè papye, otomobil, pwosesis manje, medikal.
14: Advantage: nou se yon manufacturer.with bon quanlity ak rezonab price.we ka rankontre ou tout need.we se pwofesyon
Tout Konpozisyon Chimik ak Pwopriyete Fizik pou Nerjaveèi kòm ap koule tankou dlo:
| Materyèl | ASTM A269 Chimik Konpozisyon % Max | ||||||||||
| C | Mn | P | S | Si | Cr | Ni | Mo | NB | Nb | Ti | |
| TP304 | 0.08 | 2.00 | 0.045 | 0.030 | 1.00 | 18.0-20.0 | 8.0-11.0 | ^ | ^ | ^ . | ^ |
| TP304L | 0.035 | 2.00 | 0.045 | 0.030 | 1.00 | 18.0-20.0 | 8.0-12.0 | ^ | ^ | ^ | ^ |
| TP316 | 0.08 | 2.00 | 0.045 | 0.030 | 1.00 | 16.0-18.0 | 10.0-14.0 | 2.00-3.00 | ^ | ^ | ^ |
| TP316L | 0.035 D | 2.00 | 0.045 | 0.030 | 1.00 | 16.0-18.0 | 10.0-15.0 | 2.00-3.00 | ^ | ^ | ^ |
| TP321 | 0.08 | 2.00 | 0.045 | 0.030 | 1.00 | 17.0-19.0 | 9.0-12.0 | ^ | ^ | ^ | 5C -0.70 |
| TP347 | 0.08 | 2.00 | 0.045 | 0.030 | 1.00 | 17.0-19.0 | 9.0-12.0 | 10C -1.10 | ^ | ||
| Materyèl | Tretman chalè | Tanperati F (C) Min. | Dite | |
| Brinell | Rockwell | |||
| TP304 | Solisyon | 1900 (1040) | 192HBW/200HV | 90HRB |
| TP304L | Solisyon | 1900 (1040) | 192HBW/200HV | 90HRB |
| TP316 | Solisyon | 1900 (1040) | 192HBW/200HV | 90HRB |
| TP316L | Solisyon | 1900 (1040) | 192HBW/200HV | 90HRB |
| TP321 | Solisyon | 1900(1040) F | 192HBW/200HV | 90HRB |
| TP347 | Solisyon | 1900 (1040) | 192HBW/200HV | 90HRB |
| OD, pous | OD tolerans pous (mm) | WT Tolerans % | Longè Tolerans pous (mm) | |
| + | - | |||
| ≤ 1/2 | ± 0.005 (0.13) | ± 15 | 1/8 (3.2) | 0 |
| > 1 / 2 ~ 1 1 / 2 | ± 0.005 (0.13) | ± 10 | 1/8 (3.2) | 0 |
| > 1 1 / 2 ~ < 3 1 / 2 | ± 0.010 (0.25) | ± 10 | 3/16 (4.8) | 0 |
| > 3 1 / 2 ~ < 5 1 / 2 | ± 0.015 (0.38) | ± 10 | 3/16 (4.8) | 0 |
| > 5 1 / 2 ~ < 8 | ± 0.030 (0.76) | ± 10 | 3/16 (4.8) | 0 |
| 8~<12 | ± 0.040 (1.01) | ± 10 | 3/16 (4.8) | 0 |
| 12~< 14 | ± 0.050 (1.26) | ± 10 | 3/16 (4.8) | 0 |
